Ricoh MP 2014 Error Codes
3 error codes found. Select a code from the dropdown or browse below.
SC 400
View DetailsDescription
The SC 400 error indicates a problem with the transfer roller bias.
Causes
- Defective transfer roller, dirty contacts, or control board issue.
Remedy
- 1Clean the transfer roller contacts.
- 2Replace the transfer roller.
- 3Check the high voltage power supply board.
SC 541
View DetailsDescription
The SC 541 error indicates the fusing unit is not reaching the required temperature.
Causes
- Defective fusing lamp, broken thermistor, or loose connector.
Remedy
- 1Check the fusing lamp for continuity.
- 2Inspect thermistor connections.
- 3Replace the fusing unit.
- 4Check the power supply voltage.
SC 542
View DetailsDescription
The SC 542 error indicates the fusing unit thermistor has detected abnormally high temperature.
Causes
- Defective thermistor, faulty fusing lamp, or control board failure.
Remedy
- 1Turn off the machine and wait 30 minutes.
- 2Check the fusing thermistor connection.
- 3Replace the fusing unit if the thermistor is damaged.
- 4Check the power supply board.