Kyocera ECOSYS M2040dn not printing: router or hub not working
Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw
Quick answer
If a Kyocera ECOSYS M2040dn cannot print because the router or hub is not working properly, check the link lamp on the router or hub first and restart it. If the lamp is off, unplug and replug the Ethernet cable at the router and see if the lamp comes on.
What is happening?
The router or hub links the printer to the PCs. The manual uses its link lamp as the guide: if the lamp is off, the cable is reconnected or replaced; if the lamp is on but the network still fails, the router or hub, the PC and the printer are all restarted. The same code and checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, since Kyocera covers all of them in one service manual.
What causes it?
Router or hub not running properly
It has not started properly.
Ethernet cable not connected
The cable at the router is loose.
Ethernet cable faulty
The cable is damaged.
Devices did not start properly
The router, hub, PC or printer needs a restart.
What can you check yourself?
- 1
Check the link lamp
Look at the link lamp on the router or hub for the printer's port and restart the router or hub.
- 2
Reconnect the cable
If the link lamp is off, unplug and replug the Ethernet cable at the router and check whether the lamp comes on.
- 3
Replace the cable
If the lamp stays off, try a new Ethernet cable.
- 4
Restart everything
If the lamp is on but there is still no connection, restart the router or hub, then the PC and the printer.
Need a part for this?
This is a settings or PC problem, so no spare part applies and the store has nothing to link here; ask us on WhatsApp if you need help.
Ask on WhatsApp: +91 88899-15080When should you call a technician?
Ask your IT person if the router or hub still does not link after a restart and a new cable.
Questions people ask
- How do I know if my router is stopping my Kyocera printing?
- Check the link lamp on the router or hub port the printer uses. If it is off, reconnect or replace the cable.
- Link lamp is on but my Kyocera still won't print, why?
- The Kyocera manual says to restart the router or hub, then the PC and the printer.
- Is this a printer fault?
- The manual treats it as a router, hub or cable problem.
Related codes
- Network print (1): Print out is not available from the network factor
- Offline: Offline appears and the print function is unavailable
- IP changed: The main unit IP address is changed