Shop parts
ProblemWarning

Kyocera ECOSYS M2040dn prints garbled characters

Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw

Quick answer

If a Kyocera ECOSYS M2040dn prints garbled characters, the manual says the printer driver was probably not installed properly. First make sure no jobs are running, then switch the printer off, unplug for about 5 seconds and switch on. If it continues, check fonts and reinstall the driver.

What is happening?

Garbled text usually means the printer received data it could not read correctly. The manual checks a communication error first, then whether the needed fonts are in the printer, then the bitmap font setting, and finally the printer driver itself. The same code and checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, since Kyocera covers all of them in one service manual.

What causes it?

  • Communication error

    A temporary fault between the PC and the printer.

  • Font not resident

    The font the special data needs is not in the printer.

  • Bitmap font not selected

    The default bitmap font setting has been changed.

  • Printer driver faulty

    The driver was not installed properly.

What can you check yourself?

  1. 1

    Restart the printer

    Check no job is in progress on the PC or the printer. Switch the printer off, pull the plug, wait about 5 seconds, then plug in and switch on.

  2. 2

    Print the font list

    Confirm Excel or Word prints normally, then print the Font List to see whether the fonts the data needs are in the printer.

  3. 3

    Select the bitmap font

    Choose the bitmap font (the default) and print again.

  4. 4

    Reinstall the driver

    Uninstall the printer driver and install it again.

Need a part for this?

This is a settings or PC problem, so no spare part applies and the store has nothing to link here; ask us on WhatsApp if you need help.

Ask on WhatsApp: +91 88899-15080

When should you call a technician?

Ask a technician or IT person if the characters are still garbled after reinstalling the driver.

Questions people ask

Why is my Kyocera printing strange characters?
The Kyocera manual links garbled characters to a printer driver that was not installed properly. Restart, check fonts, then reinstall the driver.
How do I print the font list on a Kyocera M2040dn?
The manual says to output the Font List from the printer to check which fonts are resident.
Is garbled printing a hardware fault?
The manual lists no part for it. All checks are a restart, fonts and the driver.

Related codes

  • Endless printing: The same data is printed out endlessly
  • Wrong driver: The incorrect printer driver was selected

See all Kyocera ECOSYS M2040dn error codes