Shop parts
ProblemWarning

Kyocera ECOSYS M2040dn not printing: network cable not connected properly

Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw

Quick answer

If a Kyocera ECOSYS M2040dn cannot print because the cable between it and the PC is not connected properly, start by plugging the network cable in again at both ends. Then restart the printer and the PC. If it still fails, replace the Ethernet cable.

What is happening?

Here the manual looks at the physical link between the printer and the PC. It checks the cable is plugged in, restarts both machines, tries a new Ethernet cable, and finally connects the printer straight to the PC with a cross cable to see if the rest of the network is the problem. The same code and checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, since Kyocera covers all of them in one service manual.

What causes it?

  • Cable not connected properly

    The network cable between printer and PC is loose.

  • Printer or PC did not start properly

    One of them needs a restart.

  • Ethernet cable faulty

    The cable itself is damaged.

  • Another part of the network is faulty

    The fault is elsewhere in the network.

What can you check yourself?

  1. 1

    Reconnect the cable

    Plug the network cable in again between the printer and the PC.

  2. 2

    Restart both

    Restart the printer, then restart the PC.

  3. 3

    Replace the cable

    Try a new Ethernet cable.

Steps for a technician

  1. 1

    Test with a direct connection

    Connect the printer straight to the PC with a cross cable and see if the same data prints. If it does, the fault is in the rest of the network.

Need a part for this?

This is a settings or PC problem, so no spare part applies and the store has nothing to link here; ask us on WhatsApp if you need help.

Ask on WhatsApp: +91 88899-15080

When should you call a technician?

Ask your IT person or a technician if a new cable and a restart do not help.

Questions people ask

Can a bad network cable stop my Kyocera printing?
Yes. The Kyocera manual lists a loose or faulty Ethernet cable among the causes.
How do I test if the network is the problem?
The manual's test is to connect the printer directly to the PC with a cross cable and print the same data.
Should I restart the printer or the PC first?
The manual says restart the printer first, then the PC.

Related codes

  • Network print (1): Print out is not available from the network factor
  • Offline: Offline appears and the print function is unavailable
  • IP changed: The main unit IP address is changed

See all Kyocera ECOSYS M2040dn error codes