Shop parts
ProblemWarning

Kyocera ECOSYS M2040dn cannot print over the network

Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw

Quick answer

If a Kyocera ECOSYS M2040dn will not print over the network, the manual says there is a network problem or a wrong network setting. First check whether the Memory lamp is blinking; if not, cancel the job and reprint. Then clear any error and check the printer's IP address.

What is happening?

This is the manual's general check list for network printing problems. It goes from the job itself, to errors on the printer, to the IP address and Command Center, to the internet connection, the cable and router, and finally a restart of the PC or printer. The same code and checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, since Kyocera covers all of them in one service manual.

What causes it?

  • Job stuck

    The job in progress is stuck.

  • Error on the printer

    A toner, paper jam or other error is stopping printing.

  • Network setting wrong

    The printer's IP address does not work.

  • Network connection down

    The internet or office network is not working.

  • Cable or router

    The network cable or the router or hub needs a reconnect or restart.

  • PC or printer locked up

    One of them has stopped responding.

What can you check yourself?

  1. 1

    Check the Memory lamp

    If the [Memory] lamp on the panel is not blinking, cancel the job in progress and print again.

  2. 2

    Clear errors

    If the panel or PC shows an error such as toner or paper jam, clear it.

  3. 3

    Check the IP address

    Find the printer's IP address on the status page and check that Command Center opens with it in a browser. If it does not, set up the network again.

  4. 4

    Check the network

    Check whether the internet connection works. If not, get the network connection repaired.

  5. 5

    Reconnect and restart

    Plug the network cable in again and restart the router or hub.

  6. 6

    Restart PC and printer

    Restart the PC or the printer and print again.

Need a part for this?

This is a settings or PC problem, so no spare part applies and the store has nothing to link here; ask us on WhatsApp if you need help.

Ask on WhatsApp: +91 88899-15080

When should you call a technician?

Ask your IT person or a technician if the printer still cannot be reached after these checks.

Questions people ask

Why is my Kyocera not printing over the network?
The Kyocera manual points to a network problem or a wrong network setting. Start with the Memory lamp, errors and the IP address.
How do I check my Kyocera's IP address?
Print a status page from the printer, then type that address into a browser to see if Command Center opens.
Should I restart the router?
Yes, it is one of the manual's steps: plug the network cable back in, then restart the router or hub.

Related codes

  • Offline: Offline appears and the print function is unavailable
  • IP changed: The main unit IP address is changed
  • Router or hub: The access point (router or hub) does not operate properly

See all Kyocera ECOSYS M2040dn error codes