Kyocera ECOSYS M2040dn: only one PC cannot print
Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw
Quick answer
If only one PC cannot print to a Kyocera ECOSYS M2040dn and its jobs stay on hold with no error, start by restarting the printer or that PC. Then reconnect the network cable and check that the IP address on the PC's printer port matches the printer's address.
What is happening?
The manual describes this on a Windows 7 PC over wireless LAN: one PC's jobs wait on hold while others print. Its checks are a restart, the cable, the IP address, the router or hub, the port options on that PC, and security software that may be blocking printing. The same code and checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, since Kyocera covers all of them in one service manual.
What causes it?
Printer or PC did not start properly
A restart is needed.
Network cable not connected
The cable is loose.
IP address wrong
The PC's port has the wrong address.
Network trouble
The hub or router has a problem.
Port settings
The port IP, SNMP or bidirectional setting on that PC is wrong.
Security software
A restriction in the security software blocks printing.
What can you check yourself?
- 1
Restart
Restart the printer or the PC.
- 2
Reconnect the cable
Plug the network cable in again.
- 3
Match the IP address
Print a status page or look in the system menu for the printer's IP address. On the PC open [Printer Properties] > [Port] and make sure the same address is used; if not, correct it on the PC.
- 4
Check the router or hub
Check whether Command Center or PING works from that PC, then check the hub or router.
- 5
Fix the port settings
In [Printer Properties] > [Port] correct the IP address, turn off [SNMP Status] and [Bidirectional Support], and restart.
- 6
Check security software
See if printing works with the security software removed, or add the printer as an exception.
Need a part for this?
This is a settings or PC problem, so no spare part applies and the store has nothing to link here; ask us on WhatsApp if you need help.
Ask on WhatsApp: +91 88899-15080When should you call a technician?
Ask your IT person if that PC still cannot print after these checks.
Questions people ask
- Why can only one computer not print to my Kyocera?
- The Kyocera manual checks that PC's IP address, port settings and security software, after a restart and cable check.
- Can antivirus stop printing to a Kyocera?
- Yes. The manual's last check is security software, and suggests setting an exception.
- Should I turn off Bidirectional Support?
- For this problem the manual says to turn off SNMP Status and Bidirectional Support on the PC's printer port.
Related codes
- Offline: Offline appears and the print function is unavailable
- IP changed: The main unit IP address is changed
- Not connected: Not connected is displayed on the PC