Shop parts
ProblemWarning

Kyocera ECOSYS M2040dn asks to load paper when paper is loaded

Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw

Quick answer

If a Kyocera ECOSYS M2040dn shows a paper loading message even though paper is in the tray, the most likely cause is a paper size mismatch between the PC job and the tray. First load paper of the size set in the driver, and check the size shown on the panel matches the loaded paper.

What is happening?

The printer asks for paper when the size or type the job wants does not match what it thinks is loaded. The manual checks paper size on the PC and the panel first, then the paper guides, then the paper sensor actuator and spring, then the application, its orientation setting and the MP tray settings. The same code and checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, since Kyocera covers all of them in one service manual.

What causes it?

  • Paper size mismatch with the PC

    The output size in the driver differs from the paper in the cassette.

  • Panel size setting wrong

    The size set on the operation panel does not match the paper loaded.

  • Guides not set

    The width guide or MP tray paper guide is not against the paper.

  • Paper sensor not working

    The actuator or spring of the paper sensor or MP paper sensor is bent or stuck.

  • Application print data

    Data from one program (such as Word) is faulty.

  • Orientation wrong

    The page orientation set in the program is not right.

  • MP tray settings differ (MP tray)

    Paper size and media type for the MP tray differ between the printer and the PC.

What can you check yourself?

  1. 1

    Load the right size

    Load paper of the size chosen at [Output Size] in the driver's [Printer Setting] > [Basis Setting].

  2. 2

    Check the panel size

    Make sure the paper size shown on the panel matches the paper in the tray. If not, change it in the system menu.

  3. 3

    Set the guides

    Slide the width guide (or the MP tray paper guide) against the paper and load it again.

  4. 4

    Try another program

    Print from a different program. If that works, change the settings in the program that failed.

  5. 5

    Check orientation

    Look at the print preview and set the right orientation in the program's page layout.

  6. 6

    Match the MP tray settings

    When printing from the MP tray, set the MP tray paper size and media type on the printer to match what the PC sends.

Steps for a technician

  1. 1

    Check the paper sensor actuator

    If the user checks do not help, check the actuator and spring of the paper sensor and MP paper sensor. Replace any that are bent or do not move freely.

Need a part for this?

The store does not list the paper sensor actuator or spring named in the manual, so please ask on WhatsApp for availability.

Ask on WhatsApp: +91 88899-15080

When should you call a technician?

Call a technician if size, guide and program checks are all right and the message still appears. The next step is the paper sensor actuator inside the machine.

Questions people ask

Why does my Kyocera M2040dn say load paper when paper is in?
Usually the paper size in the PC job does not match the size set for the tray on the printer. Match them, and set the paper guides.
Can a broken sensor cause a load paper message?
Yes. The Kyocera manual's fourth check is the actuator or spring of the paper sensor, which a technician replaces if bent.
How do I change the paper size on a Kyocera M2040dn?
Use the system menu on the panel so that the size shown matches the paper loaded.

Related codes

See all Kyocera ECOSYS M2040dn error codes