Kyocera ECOSYS M2040dn scan to e-mail error 4803: SSL session failed
Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw
Quick answer
Kyocera ECOSYS M2040dn scan to e-mail error 4803 means the printer could not set up a secure SSL session with the mail server. The most likely cause is a wrong certificate. First open Command Center, go to the Security Settings and check the printer's self-signed certificate.
What does 4803 mean?
Mail servers that use SSL need a secure session before mail is sent. Error 4803 shows when that session cannot be set up. The manual checks the printer's self-signed certificate, then the service certificate settings, both in the Security Settings, and finally the SMTP/POP3 protocol settings. The same code and checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, since Kyocera covers all of them in one service manual.
What causes 4803?
Device certificate wrong
The printer's self-signed certificate is not right.
Service certificate settings wrong
The certificate settings used for the service are not right.
SMTP/POP3 server settings wrong
The protocol settings for the mail server are not right.
What can you check yourself?
- 1
Check the device certificate
In Command Center open the Security Settings and correct the printer's own (self-signed) certificate.
- 2
Check the service certificate
In the same Security Settings, correct the certificate settings for the service.
- 3
Check the mail protocol settings
In Command Center open the Network Settings and put right the protocol settings used for SMTP and POP3.
- 4
Send again
Try the scan again after each change.
Steps for a technician
- 1
Repeat the checks
Go through the settings checks above in the same order, since every step for this code is a setting.
Need a part for this?
This is a settings problem, so no spare part applies and the store has nothing to link here; ask us on WhatsApp if you need help.
Ask on WhatsApp: +91 88899-15080When should you call a technician?
Ask your IT person or a technician if every setting above looks right and the error still shows. The fault may be in the office network or the server rather than the printer.
Questions people ask
- What does Kyocera error 4803 mean?
- On a Kyocera ECOSYS M2040dn, 4803 during scan to e-mail means the SSL session with the mail server could not be set up.
- How do I fix Kyocera SSL error 4803?
- In Command Center, check the certificates in the Security Settings, then the SMTP/POP3 protocol settings in the Network Settings.
- Is 4803 caused by the printer hardware?
- No. The Kyocera manual lists only certificate and protocol settings for this code.