Kyocera ECOSYS M2040dn scan to FTP error 2102 and 2103: FTP timeout
Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw
Codes covered on this page: 2102, 2103
Quick answer
Kyocera ECOSYS M2040dn scan to FTP error 2102 means the connection to the FTP server timed out, and 2103 means the server could not set up communication. For both, first check the FTP host name and port number, then the printer's Network Settings in Command Center.
What does 2102 mean?
2102 is a timeout while connecting to the FTP server, and 2103 means the server could not establish communication. The manual gives both the same checks: host name, port number, the printer's network settings, the office network and the FTP protocol settings. The same code and checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, since Kyocera covers all of them in one service manual.
What causes 2102?
Wrong FTP host name
The FTP server name saved in the destination is not right.
Wrong FTP port number
The port number for the FTP server is not right.
Printer network settings wrong
Something in the printer's own network setup is not right.
Office network setup wrong
The network the printer is plugged into is set up wrongly.
FTP server settings wrong
The FTP protocol settings in the printer are not right.
What can you check yourself?
- 1
Check the FTP host name
Correct the FTP host name through Command Center or in the destination entry.
- 2
Check the FTP port number
Correct the FTP port number in the destination or in the printer.
- 3
Check the printer's network settings
In Command Center open the Network Settings and fix any wrong entry, such as the IP address details.
- 4
Check the FTP protocol settings
In Command Center open the Network Settings and put right the FTP protocol settings.
- 5
Send again
Try the scan again after each change.
Steps for a technician
- 1
Check the office network
Check the setup of the network the printer is connected to and correct it.
Need a part for this?
This is a settings problem, so no spare part applies and the store has nothing to link here; ask us on WhatsApp if you need help.
Ask on WhatsApp: +91 88899-15080When should you call a technician?
Ask your IT person or a technician if every setting above looks right and the error still shows. The fault may be in the office network or the server rather than the printer.
Questions people ask
- What is Kyocera FTP error 2102?
- On a Kyocera ECOSYS M2040dn, 2102 means the connection to the FTP server timed out.
- What is Kyocera FTP error 2103?
- 2103 means the FTP server could not establish communication. It is checked the same way as 2102.
- How do I fix a scan to FTP timeout on Kyocera?
- Check the FTP host name and port, the Network Settings in Command Center, and then the office network.