Shop parts
2101Send error codeWarning

Kyocera ECOSYS M2040dn scan to e-mail error 2101: cannot connect to server

Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw

Quick answer

Kyocera ECOSYS M2040dn scan to e-mail error 2101 means the printer could not connect to the SMTP/POP3 mail server. The first thing the manual checks is the server name, then the LAN cable and the port number. Start in Command Center under Function Settings, E-mail.

What does 2101 mean?

Error 2101 shows when the printer tries to open a connection to the mail server and fails. The manual works through six checks in order: server name, LAN cable, SMTP/POP3 port number, the printer's network settings, the office network, and the mail server protocol settings. The same code and checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, since Kyocera covers all of them in one service manual.

What causes 2101?

  • Wrong SMTP/POP3 server name

    The mail server name saved in the printer is not right.

  • LAN cable not connected

    The network cable is not plugged into the printer.

  • Wrong SMTP/POP3 port number

    The port number for the mail server is not right.

  • Printer network settings wrong

    Something in the printer's own network setup is not right.

  • Office network setup wrong

    The network the printer is plugged into is set up wrongly.

  • SMTP/POP3 server settings wrong

    The protocol settings for the mail server are not right.

What can you check yourself?

  1. 1

    Check the mail server name

    Open Command Center (the printer's web page, opened by typing the printer's IP address into a browser on a PC). Go to [Function Settings] > [E-mail] and correct the SMTP and POP3 server names.

  2. 2

    Check the LAN cable

    Make sure the network cable is pushed firmly into the printer's LAN port.

  3. 3

    Check the mail port number

    Correct the SMTP and POP3 port numbers saved in the printer.

  4. 4

    Check the printer's network settings

    In Command Center open the Network Settings and fix any wrong entry, such as the IP address details.

  5. 5

    Check the mail protocol settings

    In Command Center open the Network Settings and put right the protocol settings used for SMTP and POP3.

  6. 6

    Send again

    Try the scan again after each change.

Steps for a technician

  1. 1

    Check the office network

    Check the setup of the network the printer is connected to and correct it.

Need a part for this?

This is a settings problem, so no spare part applies and the store has nothing to link here; ask us on WhatsApp if you need help.

Ask on WhatsApp: +91 88899-15080

When should you call a technician?

Ask your IT person or a technician if every setting above looks right and the error still shows. The fault may be in the office network or the server rather than the printer.

Questions people ask

What does Kyocera scan to email error 2101 mean?
On a Kyocera ECOSYS M2040dn it means the connection to the SMTP/POP3 mail server failed.
Can a loose network cable cause error 2101?
Yes. The Kyocera manual's second check for 2101 is that the LAN cable is plugged into the printer.
What port should Kyocera scan to email use?
The manual does not give a number. It says to correct the SMTP/POP3 port to the one your mail server uses.

Related codes

See all Kyocera ECOSYS M2040dn error codes