Kyocera ECOSYS M2040dn scan to SMB error 1101: destination PC not found
Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw
Quick answer
Kyocera ECOSYS M2040dn scan to SMB error 1101 means the printer could not find the destination PC or server on the network when scanning to a shared folder. The most likely cause is a wrong host name. First correct the host name in the scan destination, then check the Network Settings.
What does 1101 mean?
Scan to SMB sends the file to a shared folder on a PC or server. Error 1101 means the printer could not find that host on the network. The manual checks the destination host name, then the printer's network settings, then the office network. The same code and checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, since Kyocera covers all of them in one service manual.
What causes 1101?
Wrong destination host name
The PC or server name saved for the scan destination is not right.
Printer network settings wrong
Something in the printer's own network setup is not right.
Office network setup wrong
The network the printer is plugged into is set up wrongly.
What can you check yourself?
- 1
Check the destination host name
Correct the host name (the PC or server name) in the scan destination.
- 2
Check the printer's network settings
In Command Center open the Network Settings and fix any wrong entry, such as the IP address details.
- 3
Send again
Try the scan again after each change.
Steps for a technician
- 1
Check the office network
Check the setup of the network the printer is connected to and correct it.
Need a part for this?
This is a settings problem, so no spare part applies and the store has nothing to link here; ask us on WhatsApp if you need help.
Ask on WhatsApp: +91 88899-15080When should you call a technician?
Ask your IT person or a technician if every setting above looks right and the error still shows. The fault may be in the office network or the server rather than the printer.
Questions people ask
- What is Kyocera scan to folder error 1101?
- On a Kyocera ECOSYS M2040dn, 1101 in scan to SMB means the destination PC or server could not be found on the network.
- Why does Kyocera scan to PC say 1101?
- Usually the host name saved in the destination does not match the PC. Correct it, then check the printer's Network Settings.
- Is SMB error 1101 the same as e-mail error 1101?
- The number is shared but the meaning depends on the send type. For SMB it means the destination host was not found.