Shop parts
2203Send error codeWarning

Kyocera ECOSYS M2040dn scan to SMB error 2203: no reply from PC

Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw

Quick answer

Kyocera ECOSYS M2040dn scan to SMB error 2203 means the destination PC did not answer for a certain time. Check the Network Settings and the LAN cable first. If 2203 does not go away, the manual says to allow File and Printer Sharing in Windows Firewall on the destination PC.

What does 2203 mean?

Error 2203 shows when the PC holding the shared folder stops replying. The manual checks the printer's network settings, the office network and the LAN cable. For the case where 2203 will not go away, it points to Windows Firewall on Vista, 7 or 8 PCs not allowing file and printer sharing. The same code and checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, since Kyocera covers all of them in one service manual.

What causes 2203?

  • Printer network settings wrong

    Something in the printer's own network setup is not right.

  • Office network setup wrong

    The network the printer is plugged into is set up wrongly.

  • LAN cable not connected

    The network cable is not plugged into the printer.

  • Windows Firewall blocking sharing

    On Windows Vista, 7 or 8 PCs the firewall may not allow file and printer sharing.

What can you check yourself?

  1. 1

    Check the printer's network settings

    In Command Center open the Network Settings and fix any wrong entry, such as the IP address details.

  2. 2

    Check the LAN cable

    Make sure the network cable is pushed firmly into the printer's LAN port.

  3. 3

    Allow file and printer sharing

    On the destination PC open [Control Panel] > [System and Security] > [Windows Firewall] > [Allow programs or functions via Windows Firewall], then tick [File and Printer Sharing] and its checkbox on the right.

  4. 4

    Send again

    Try the scan again after each change.

Steps for a technician

  1. 1

    Check the office network

    Check the setup of the network the printer is connected to and correct it.

Need a part for this?

This is a settings problem, so no spare part applies and the store has nothing to link here; ask us on WhatsApp if you need help.

Ask on WhatsApp: +91 88899-15080

When should you call a technician?

Ask your IT person or a technician if every setting above looks right and the error still shows. The fault may be in the office network or the server rather than the printer.

Questions people ask

What is Kyocera scan to folder error 2203?
On a Kyocera ECOSYS M2040dn, 2203 means the destination PC or server did not respond for a certain period.
Can Windows Firewall cause Kyocera error 2203?
Yes. When 2203 does not clear, the manual says to allow File and Printer Sharing in Windows Firewall on the destination PC.
How do I fix Kyocera SMB 2203?
Check the Network Settings, the office network and the LAN cable, then the Windows Firewall sharing setting on the PC.

Related codes

See all Kyocera ECOSYS M2040dn error codes