Shop parts
ProblemWarning

Kyocera ECOSYS M2040dn does not print from sleep mode

Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw

Quick answer

If a Kyocera ECOSYS M2040dn does not print when it is in sleep mode, and the Processing or Memory lamp stays on, the machine failed to start up from sleep. The manual's fixes are a firmware update and setting the Sleep Level to Quick Recovery after a full power reset.

What is happening?

When a job arrives in sleep mode, the printer must wake and start up. Here it fails to start and locks up, with the Processing or Memory lamp on. The manual lists old firmware first and a Sleep Level that is not set to Quick Recovery second. The same code and checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, since Kyocera covers all of them in one service manual.

What causes it?

  • Firmware not up to date

    The firmware is older than the latest version.

  • Sleep Level not on Quick Recovery

    The deeper sleep setting is in use.

What can you check yourself?

  1. 1

    Restart the printer

    Switch off at the power switch and pull the plug. Wait about 5 seconds, plug in and switch on.

  2. 2

    Set the Sleep Level

    After the restart, set the Sleep Level to Quick Recovery in the printer's settings.

Steps for a technician

  1. 1

    Update the firmware

    Upgrade the printer firmware to the latest version.

Need a part for this?

This is a settings or PC problem, so no spare part applies and the store has nothing to link here; ask us on WhatsApp if you need help.

Ask on WhatsApp: +91 88899-15080

When should you call a technician?

Call a technician for the firmware update if setting Quick Recovery does not solve it.

Questions people ask

Why doesn't my Kyocera wake up to print?
The Kyocera manual links it to old firmware and to the Sleep Level not being set to Quick Recovery.
What is Quick Recovery on a Kyocera M2040dn?
It is a Sleep Level setting. The manual says to choose it when the printer does not print from sleep.
Does this need a technician?
Setting the Sleep Level can be done by the user. A firmware update is usually done by a technician.

Related codes

See all Kyocera ECOSYS M2040dn error codes