Kyocera ECOSYS M2040dn printer driver stuck on Deleting
Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw
Quick answer
If the Kyocera ECOSYS M2040dn printer driver shows Deleting and stays that way even after reinstalling, jobs are still stuck in the spool. First cancel all jobs spooled in the printer driver. Then delete unused drivers and resume the printer if it is paused.
What is happening?
Windows will not finish removing a driver while jobs are still queued for it. The manual clears the spool, removes unused drivers, resumes a paused printer, then fixes the IP address on the port and, if needed, adds a Standard TCP/IP port for the printer. The same code and checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, since Kyocera covers all of them in one service manual.
What causes it?
Jobs left in the spool
Print jobs remain queued in the printer driver.
Unused driver installed
An old driver is still on the PC.
Printer paused
The system has the printer paused.
IP address wrong
The port does not use the printer's address.
No Standard TCP/IP port
There is no port for the printer's IP address.
What can you check yourself?
- 1
Cancel spooled jobs
Cancel every print job spooled in the printer driver.
- 2
Remove unused drivers
Delete any printer driver that is not used.
- 3
Resume printing
Right-click the paused printer icon, choose to resume printing, and check the port is ready.
- 4
Fix the IP address
On a local network, check the printer's IP address on the status page and correct it on the [Port] tab of [Printer Properties].
- 5
Add a TCP/IP port
If no port exists for the printer's address, add it as a Standard TCP/IP port and print a test page.
Need a part for this?
This is a settings or PC problem, so no spare part applies and the store has nothing to link here; ask us on WhatsApp if you need help.
Ask on WhatsApp: +91 88899-15080When should you call a technician?
Ask your IT person if the driver still shows Deleting after the spool is cleared.
Questions people ask
- Why is my Kyocera driver stuck on Deleting?
- The Kyocera manual says print jobs are still in the spool. Cancel them all first.
- How do I add a Standard TCP/IP port for my Kyocera?
- Add the printer's IP address as a Standard TCP/IP port in the PC's printer settings, then print a test page.
- Will reinstalling the driver fix Deleting?
- Not on its own. Clear the spooled jobs and remove unused drivers first.