Kyocera ECOSYS M2040dn toner on the back of the page or paper edges
Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw
Quick answer
Toner on the back of the page or along the paper edge on a Kyocera ECOSYS M2040dn comes from loose toner in the paper path. It is an engine fault, not a scanner one. Check the media type matches your paper first. A technician then cleans the transfer roller, the fuser press roller, the conveying guide and the developer unit.
What is happening?
Kyocera lists two related faults under paper path causes: toner smudges at the paper edge, and a dirty reverse side. Both come from toner sitting where the paper touches it, such as the conveying guide, the developer unit and duct, the transfer roller or the fuser press roller. A press roller gets dirty more easily when the media type is set wrongly. The same checks apply to all eight models in this service manual.
What causes it?
Toner on the conveying guide
The conveying guide, developer unit or developer duct has toner on it, leaving marks on the paper edge or back.
Dirty or scratched transfer roller
Seen as marks repeating at one roller turn.
Dirty fuser press roller
The press roller picks up toner, depending on the media type selected.
What can you check yourself?
- 1
Set the media type
In the System Menu, set the media type to match the paper in use.
Steps for a technician
- 1
Edge smudges
Clean the conveying guide, the developer unit and the developer duct.
- 2
Transfer roller
If marks repeat at one transfer roller turn, clean the roller; replace it if that does not work.
- 3
Fuser press roller
Clean the fuser press roller and set the proper media type in the system menu.
- 4
Conveying guide and developer
Clean the conveying guide and the developer unit.
Need a part for this?
The store does not list the transfer roller named for this fault, and the manual only asks for the press roller to be cleaned, so please ask on WhatsApp if you need help.
Ask on WhatsApp: +91 88899-15080When should you call a technician?
Call a technician if the back or edges of the pages stay dirty after the media type is set correctly.
Questions people ask
- Why is the back of my Kyocera M2040dn prints dirty?
- Toner in the paper path is rubbing onto the paper. The Kyocera service manual cleans the transfer roller, the fuser press roller, the conveying guide and the developer unit.
- Why are there toner marks on the edge of the paper?
- The manual links edge smudges to toner on the conveying guide, the developer unit and the developer duct, which a technician cleans.
- Do I need a new pressure roller for a dirty back side?
- The service manual only asks for the fuser press roller to be cleaned and the media type to be set correctly. It does not replace the roller for this fault.