Shop parts
ProblemWarning

Kyocera ECOSYS M2040dn stopped printing after its IP address changed

Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw

Quick answer

If a Kyocera ECOSYS M2040dn stops printing because its IP address has changed, the PC is still sending to the old address. Check the address on the printer's status page, correct it in the PC's Printer Properties, Port tab, and set the printer to a static IP address.

What is happening?

A printer that gets its address automatically can be given a new one, and the PCs then lose it. The manual restarts the router or hub if all PCs are affected, reconnects the cable, restarts the printer, then corrects the IP on the PC and sets the printer to a static IP address so it does not change again. The same code and checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, since Kyocera covers all of them in one service manual.

What causes it?

  • Network trouble

    If all PCs are affected, the router or hub may need a restart.

  • Network cable not connected

    The cable is loose.

  • Printer did not start properly

    A restart is needed.

  • IP address changed

    The PC still uses the printer's old address.

  • No static IP address

    The printer is not set to a fixed address.

What can you check yourself?

  1. 1

    Restart the router (all PCs affected)

    If no PC on the network can print, restart the router or hub.

  2. 2

    Reconnect the cable

    Plug the network cable in again.

  3. 3

    Restart the printer

    Switch off at the power switch and pull the plug. Wait about 5 seconds, plug in and switch on.

  4. 4

    Match the IP address

    Print a status page or look in the system menu for the printer's IP address. On the PC open [Printer Properties] > [Port] and make sure the same address is used; if not, correct it on the PC.

  5. 5

    Set a static IP address

    In the printer's system menu set the network to a static IP address.

Need a part for this?

This is a settings or PC problem, so no spare part applies and the store has nothing to link here; ask us on WhatsApp if you need help.

Ask on WhatsApp: +91 88899-15080

When should you call a technician?

Ask your IT person to set the static IP address if you are not sure which address to use.

Questions people ask

Why did my Kyocera stop printing after a router change?
The printer's IP address probably changed. Match the new address on the PC and set a static IP on the printer.
How do I set a static IP on a Kyocera M2040dn?
The manual says to set the network to a static IP address in the system menu.
How do I find the new IP address?
Print a status page or look in the system menu.

Related codes

See all Kyocera ECOSYS M2040dn error codes