Shop parts
ProblemWarning

Kyocera ECOSYS M2040dn shows Offline and will not print

Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw

Quick answer

If a Kyocera ECOSYS M2040dn shows Offline on the PC and will not print, the manual starts with the network: check the internet connection works. Then check the driver is not set to pause or offline, and restart the PC. Next check the IP address matches on the printer and the PC.

What is happening?

Offline means the PC thinks it cannot talk to the printer. The manual works through seven checks: the network, the PC's pause or offline state, the program, the IP address on both sides, Command Center or PING, the Bidirectional Support and SNMP Status port options, and a restart of the printer. The same code and checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, since Kyocera covers all of them in one service manual.

What causes it?

  • Network trouble

    The network connection is not available.

  • PC fault

    The PC has the printer paused or offline, or needs a restart.

  • Program settings

    One program is not set up properly.

  • IP address wrong

    The IP address on the PC does not match the printer, or does not respond.

  • Port settings

    Bidirectional Support and SNMP Status on the PC's port are causing trouble.

  • Printer did not start properly

    The printer needs a restart.

What can you check yourself?

  1. 1

    Check the network

    Check the internet works and get the network connection fixed if not.

  2. 2

    Check pause and offline

    When the driver shows Offline, see if the printer is paused or set to use offline on the PC, then restart the PC.

  3. 3

    Try another program

    Check whether Excel, Word or other files print, and change the setting of the program that fails.

  4. 4

    Match the IP address

    Print a status page or look in the system menu for the printer's IP address. On the PC open [Printer Properties] > [Port] and make sure the same address is used; if not, correct it on the PC.

  5. 5

    Test the address

    Check that Command Center opens, or PING answers, at that IP address. Correct the address if needed and restart the printer.

  6. 6

    Change the port options

    In [Printer Properties] > [Port], untick [Bidirectional Support] and [SNMP Status], then restart the printer and the PC.

  7. 7

    Restart the printer

    Once it shows Ready, check a test print works, and restart the printer if it does not.

Need a part for this?

This is a settings or PC problem, so no spare part applies and the store has nothing to link here; ask us on WhatsApp if you need help.

Ask on WhatsApp: +91 88899-15080

When should you call a technician?

Ask your IT person or a technician if the printer still shows Offline after these checks.

Questions people ask

Why does my Kyocera show Offline?
The PC cannot reach it. The Kyocera manual checks the network, the pause or offline state, the IP address and the port options.
How do I get my Kyocera M2040dn back online?
Check the network and IP address, make sure it is not paused on the PC, restart the PC, and untick Bidirectional Support and SNMP Status if needed.
What is SNMP Status on the printer port?
It is an option on the Port tab of Printer Properties. The manual says to untick it, with Bidirectional Support, when the printer shows Offline.

Related codes

See all Kyocera ECOSYS M2040dn error codes