Kyocera ECOSYS M2040dn shows Printer Pending and locks up
Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw
Quick answer
If a Kyocera ECOSYS M2040dn shows Printer Pending while the Processing or Memory lamp stays on, the machine has locked up. First check no error is shown on the panel, cancel the print jobs from every PC, then switch off, unplug for about 5 seconds and switch on again.
What is happening?
In this case the printer is not ready to print and has locked up while holding job data. The manual's step is to cancel print jobs from all PCs and then do a full power reset. The same code and checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, since Kyocera covers all of them in one service manual.
What causes it?
Machine locked up
The printer is not ready to print and is stuck with job data.
What can you check yourself?
- 1
Check the panel
Make sure no error is shown on the operation panel.
- 2
Cancel all jobs
Cancel the print jobs from every PC that sent one.
- 3
Restart the printer
Switch off at the power switch and pull the plug. Wait about 5 seconds, plug in and switch on.
Need a part for this?
This is a settings or PC problem, so no spare part applies and the store has nothing to link here; ask us on WhatsApp if you need help.
Ask on WhatsApp: +91 88899-15080When should you call a technician?
Call a technician if the printer locks up again soon after a restart.
Questions people ask
- What does Printer Pending mean on a Kyocera?
- On a Kyocera ECOSYS M2040dn it can mean the machine has locked up while the Processing or Memory lamp is on.
- How do I unlock a Kyocera M2040dn?
- Cancel the print jobs from all PCs, then switch off, unplug for about 5 seconds and switch on.
- Will I lose my print jobs?
- Yes, the manual's step cancels them, so send them again after the restart.