Kyocera ECOSYS M2040dn stops and locks after printing a few pages
Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw
Quick answer
If a Kyocera ECOSYS M2040dn stops after a few pages and locks up with no error, the manual says image processing ran out of memory. If the panel does not respond, switch off, unplug for about 5 seconds and switch on. Then try printing from another PC.
What is happening?
Large or complex print data can use up the memory the printer needs for image processing, and the whole machine then locks. New jobs wait on hold. The manual checks a power reset, the PC that sent the job, the application or file (for example large CAD files), the firmware, and finally cancelling the job. The same code and checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, since Kyocera covers all of them in one service manual.
What causes it?
Machine locked up
Image processing stopped because memory ran short.
One PC sends faulty data
Data processing on a particular PC is faulty.
Application or file settings
A certain program or a large file, such as CAD data, causes it.
Firmware not up to date
The main firmware is older than the latest version.
Job processing failed
The job in progress could not be processed.
What can you check yourself?
- 1
Restart if locked
If the panel and keys do not respond, switch off, pull the plug, wait about 5 seconds, then plug in and switch on.
- 2
Try another PC
Print the same job from another PC on the network. If only one PC has the problem, use another PC.
- 3
Check the file and program
See if it only happens with one program or a large file such as CAD data, and change the program setting or check its Help.
- 4
Cancel and reprint
Cancel the job in progress from the printer's job status screen and print it again.
Steps for a technician
- 1
Update the firmware
Upgrade the main firmware to the latest version.
Need a part for this?
This is a settings or PC problem, so no spare part applies and the store has nothing to link here; ask us on WhatsApp if you need help.
Ask on WhatsApp: +91 88899-15080When should you call a technician?
Call a technician if it keeps locking up with normal files, as a firmware update is the next step.
Questions people ask
- Why does my Kyocera stop printing after a few pages?
- The Kyocera manual says the machine locks when image processing runs out of memory, often with large files.
- Can a big PDF or CAD file lock a Kyocera M2040dn?
- Yes. The manual lists large files such as CAD data among the causes.
- Will a restart fix it?
- It frees the locked machine. If the same file locks it again, change the program setting or ask for a firmware update.
Related codes
- Printer Pending, locked: Printer Pending message is displayed
- Image missing: A part of the image is missing