Kyocera ECOSYS M2040dn sends a scan from the glass before you add more pages
Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw
Quick answer
If a Kyocera ECOSYS M2040dn sends a scan from the contact glass straight away, before you can place the next page, Continuous Scan is switched off. The fix is a setting: press System Menu/Counter, go to Common Setting, Function Defaults, Continuous Scan-Other, and select On.
What is happening?
When Continuous Scan is off, the machine sends the job as soon as one page on the glass has been scanned. With it on, the machine waits so you can scan more pages into the same job. On LCD models such as the M2040dn the setting is called Continuous Scan-Other; on touch panel models it is Continuous Scan (Send/Store). The same code and checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, since Kyocera covers all of them in one service manual.
What causes it?
Continuous Scan is off
The default for sending does not wait for more pages.
What can you check yourself?
- 1
Open the default settings
Press the [System Menu/Counter] key, then go to [Common Setting] > [Function Defaults].
- 2
Turn on Continuous Scan
On LCD models choose [Continuous Scan-Other] and select [On]. On touch panel models choose [Continuous Scan (Send/Store)] and set it to [On].
- 3
Scan again
Place the first page, scan, then add the next pages before finishing the job.
Steps for a technician
- 1
Check the default
If the user cannot find the menu, set Continuous Scan to On in Function Defaults as above.
Need a part for this?
This is a settings problem, so no spare part applies and the store has nothing to link here; ask us on WhatsApp if you need help.
Ask on WhatsApp: +91 88899-15080When should you call a technician?
This is a setting, so a technician is rarely needed. Ask for help if the menu is locked by an administrator.
Questions people ask
- Why does my Kyocera send the scan after the first page?
- On a Kyocera ECOSYS M2040dn this happens when Continuous Scan is off. Turn it on under System Menu/Counter, Common Setting, Function Defaults.
- How do I scan several pages from the glass on a Kyocera M2040dn?
- Set Continuous Scan-Other to On in Function Defaults, then scan each page before finishing the job.
- Is this a fault in the scanner?
- No. The Kyocera manual treats it as a setting only.