Shop parts
ProblemInformation

Kyocera ECOSYS M2040dn skewed or crooked image

Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw

Quick answer

A skewed or crooked image on a Kyocera ECOSYS M2040dn usually means the original or the paper is fed at an angle. Check whether copies only, or prints too, are crooked. For copies, set the original straight and move the document processor width guides to the original. For prints, align the cassette or MP tray paper guides.

What is happening?

If copies are crooked but prints are straight, the original is skewing while it is scanned, either on the glass or in the document processor. If prints are crooked too, the paper is skewing on its way through the printer. Kyocera starts with the guides in both cases. The same checks apply to all eight models in this service manual.

What causes it?

  • Original placed or fed crooked

    An original set at an angle, bent or creased, or DP width guides not set to the original.

  • Dirty or worn DP feed roller

    The DP feed roller or DP conveying rollers A and B are dirty.

  • Scanner carriage or DPCIS fitting

    A scanner carriage or DPCIS that is not fitted properly.

  • Paper guides (engine)

    Paper width guides in the cassette, MP tray guide or paper feeder guides not set to the paper size, or fitted badly or broken.

What can you check yourself?

  1. 1

    Copy or print?

    Print a page from your computer or the Test Page from Service Setting. If that is straight, only the scanning is skewed.

  2. 2

    Set the original straight

    Smooth out folds, place the original square on the glass, or slide the document processor width guides against the stack.

  3. 3

    Set the paper guides

    Move the paper width guides in the cassette, the MP tray guide or the paper feeder guide to the paper size and reload the paper.

Steps for a technician

  1. 1

    Isolate copy or print

    Compare a copy with a print. A crooked print means paper skew in the engine; a straight print with a crooked copy means a scanner side fault.

  2. 2

    Document processor

    Straighten the original and reset the DP width guides. Clean the DP feed roller and replace it if dirt will not come off. Clean DP conveying rollers A and B.

  3. 3

    Back side and contact glass

    For back side skew on 40 ppm models, fix the front side first and refit the DPCIS. For glass copies, reset the original and refit the scanner carriage.

  4. 4

    Paper guides (engine)

    Set the paper width guide, MP tray guide or paper feeder guide to the paper size. Refit a guide that is loose and replace one that is broken.

Need a part for this?

The store does not list the DP feed roller, DP conveying rollers or paper guides named for this fault, so please ask on WhatsApp for availability.

Ask on WhatsApp: +91 88899-15080

When should you call a technician?

Call a technician if the image is still crooked after setting the original and paper guides correctly.

Questions people ask

Why are my Kyocera M2040dn copies crooked?
The original is going in at an angle. Set it straight on the glass or slide the document processor width guides against the stack. If it continues, a technician cleans or replaces the DP feed roller.
Why are prints crooked on my Kyocera?
The paper guides in the cassette, MP tray or paper feeder are not set to the paper size. Reset them and reload the paper.
How do I tell if skew is from the scanner or printer?
Print a page from the computer. If it is straight while copies are crooked, the scanner side is the cause.

Related codes

See all Kyocera ECOSYS M2040dn error codes