Shop parts
1131Send error codeWarning

Kyocera ECOSYS M2040dn scan to FTP error 1131 and 1132: TLS failed

Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw

Codes covered on this page: 1131, 1132

Quick answer

Kyocera ECOSYS M2040dn scan to FTP error 1131 means starting TLS failed, and 1132 means TLS negotiation with the server failed. Both point to secure FTP settings. The first thing to check is the Security Settings in Command Center. For 1132, then check the FTP server settings.

What does 1131 mean?

TLS is the encryption used for secure FTP. 1131 shows when TLS cannot even start in the printer, and 1132 when the printer and the server cannot agree on a secure session. For both the manual checks the printer's Security Settings; for 1132 it also checks the FTP protocol settings. The same code and checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, since Kyocera covers all of them in one service manual.

What causes 1131?

  • Security settings wrong

    The printer's security settings, which control TLS, are not right.

  • FTP server settings wrong (1132)

    The FTP protocol settings in the printer are not right.

What can you check yourself?

  1. 1

    Check the security settings

    In Command Center open the Security Settings and correct them.

  2. 2

    Check the FTP protocol settings

    In Command Center open the Network Settings and put right the FTP protocol settings.

  3. 3

    Send again

    Try the scan again after each change.

Steps for a technician

  1. 1

    Repeat the checks

    Go through the settings checks above in the same order, since every step for this code is a setting.

Need a part for this?

This is a settings problem, so no spare part applies and the store has nothing to link here; ask us on WhatsApp if you need help.

Ask on WhatsApp: +91 88899-15080

When should you call a technician?

Ask your IT person or a technician if every setting above looks right and the error still shows. The fault may be in the office network or the server rather than the printer.

Questions people ask

What is Kyocera FTP error 1131?
On a Kyocera ECOSYS M2040dn, 1131 means initializing TLS for secure FTP failed. Check the Security Settings.
What does error 1132 mean on a Kyocera?
1132 means TLS negotiation with the FTP server failed. Check the Security Settings, then the FTP server settings.
Are 1131 and 1132 hardware faults?
No. The Kyocera manual lists only security and FTP protocol settings for these codes.

Related codes

See all Kyocera ECOSYS M2040dn error codes