Kyocera ECOSYS M2040dn scan to FTP error 2101: cannot connect to FTP
Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw
Quick answer
Kyocera ECOSYS M2040dn scan to FTP error 2101 means the printer could not connect to the FTP server. The manual first checks the FTP host name, then the LAN cable and the FTP port number. Start by correcting the host name in Command Center and checking the cable is plugged in.
What does 2101 mean?
Error 2101 shows when the printer tries to connect to the FTP server and fails. The manual works through five checks: FTP host name, LAN cable, FTP port number, the printer's network settings, and the FTP protocol settings. The same code and checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, since Kyocera covers all of them in one service manual.
What causes 2101?
Wrong FTP host name
The FTP server name saved in the destination is not right.
LAN cable not connected
The network cable is not plugged into the printer.
Wrong FTP port number
The port number for the FTP server is not right.
Printer network settings wrong
Something in the printer's own network setup is not right.
FTP server settings wrong
The FTP protocol settings in the printer are not right.
What can you check yourself?
- 1
Check the FTP host name
Correct the FTP host name through Command Center or in the destination entry.
- 2
Check the LAN cable
Make sure the network cable is pushed firmly into the printer's LAN port.
- 3
Check the FTP port number
Correct the FTP port number in the destination or in the printer.
- 4
Check the printer's network settings
In Command Center open the Network Settings and fix any wrong entry, such as the IP address details.
- 5
Check the FTP protocol settings
In Command Center open the Network Settings and put right the FTP protocol settings.
- 6
Send again
Try the scan again after each change.
Steps for a technician
- 1
Repeat the checks
Go through the settings checks above in the same order, since every step for this code is a setting.
Need a part for this?
This is a settings problem, so no spare part applies and the store has nothing to link here; ask us on WhatsApp if you need help.
Ask on WhatsApp: +91 88899-15080When should you call a technician?
Ask your IT person or a technician if every setting above looks right and the error still shows. The fault may be in the office network or the server rather than the printer.
Questions people ask
- What does Kyocera FTP error 2101 mean?
- On a Kyocera ECOSYS M2040dn, 2101 in scan to FTP means the connection to the FTP server failed.
- Can a network cable cause Kyocera FTP error 2101?
- Yes. The manual's second check is that the LAN cable is plugged into the printer.
- What should I check after the host name for 2101?
- The LAN cable, the FTP port number, the Network Settings and the FTP protocol settings, in that order.