Shop parts
1105Send error codeWarning

Kyocera ECOSYS M2040dn scan to SMB error 1105: SMB not enabled

Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw

Quick answer

Kyocera ECOSYS M2040dn scan to SMB error 1105 means the SMB protocol, used to scan to a shared folder, is not turned on or not set correctly. The fix is to open Command Center, go to the Network Settings and enable and correct the SMB protocol, then scan again.

What does 1105 mean?

Scanning to a shared folder needs the SMB protocol switched on in the printer. Error 1105 shows when it is off or its settings are wrong. The manual gives one step: correct the protocol in the Network Settings through Command Center. The same code and checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, since Kyocera covers all of them in one service manual.

What causes 1105?

  • SMB protocol settings wrong

    SMB is not turned on, or its settings are not right.

What can you check yourself?

  1. 1

    Check the SMB protocol

    In Command Center open the Network Settings and turn on and correct the SMB protocol.

  2. 2

    Send again

    Try the scan again after each change.

Steps for a technician

  1. 1

    Repeat the checks

    Go through the settings checks above in the same order, since every step for this code is a setting.

Need a part for this?

This is a settings problem, so no spare part applies and the store has nothing to link here; ask us on WhatsApp if you need help.

Ask on WhatsApp: +91 88899-15080

When should you call a technician?

Ask your IT person or a technician if every setting above looks right and the error still shows. The fault may be in the office network or the server rather than the printer.

Questions people ask

What does Kyocera SMB error 1105 mean?
On a Kyocera ECOSYS M2040dn, 1105 means the SMB protocol is not enabled, so scan to folder cannot work.
How do I turn on SMB on a Kyocera M2040dn?
Open Command Center with the printer's IP address, go to the Network Settings and enable SMB.
Does SMB error 1105 need a technician?
No. It is a single setting the office user or IT person can change.

Related codes

See all Kyocera ECOSYS M2040dn error codes