Shop parts
2101Send error codeWarning

Kyocera ECOSYS M2040dn scan to SMB error 2101: cannot connect to PC

Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw

Quick answer

Kyocera ECOSYS M2040dn scan to SMB error 2101 means the printer could not connect and log in to the destination PC. Check the host name and LAN cable first. If 2101 stays even after changing the host name or security software settings, the manual says to change the SMB port from 139 to 445.

What does 2101 mean?

Error 2101 shows when the printer cannot reach and log in to the PC or server with the shared folder. The manual checks the host name, the LAN cable, the SMB port number, the printer's network settings and the office network. It adds a specific tip: when 2101 does not go away after changing the host name or security software settings, set the SMB port to 445 instead of 139. The same code and checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, since Kyocera covers all of them in one service manual.

What causes 2101?

  • Wrong destination host name

    The PC or server name saved for the scan destination is not right.

  • LAN cable not connected

    The network cable is not plugged into the printer.

  • Wrong SMB port number

    The port number for SMB is not right. The manual's tip is to change it from 139 to 445.

  • Printer network settings wrong

    Something in the printer's own network setup is not right.

  • Office network setup wrong

    The network the printer is plugged into is set up wrongly.

What can you check yourself?

  1. 1

    Check the destination host name

    Correct the host name (the PC or server name) in the scan destination.

  2. 2

    Check the LAN cable

    Make sure the network cable is pushed firmly into the printer's LAN port.

  3. 3

    Check the SMB port

    Correct the SMB port number. If 2101 stays even after changing the host name or security software settings, the manual says to change the SMB port from 139 to 445.

  4. 4

    Check the printer's network settings

    In Command Center open the Network Settings and fix any wrong entry, such as the IP address details.

  5. 5

    Send again

    Try the scan again after each change.

Steps for a technician

  1. 1

    Check the office network

    Check the setup of the network the printer is connected to and correct it.

Need a part for this?

This is a settings problem, so no spare part applies and the store has nothing to link here; ask us on WhatsApp if you need help.

Ask on WhatsApp: +91 88899-15080

When should you call a technician?

Ask your IT person or a technician if every setting above looks right and the error still shows. The fault may be in the office network or the server rather than the printer.

Questions people ask

How do I fix Kyocera scan to folder error 2101?
Check the host name and LAN cable, then change the SMB port number from 139 to 445, as the Kyocera manual advises.
Which SMB port should a Kyocera M2040dn use?
When error 2101 persists, the manual says to change the SMB port from 139 to 445.
Error 2101 stays after I changed the host name, what next?
The manual's answer for this case is the SMB port: change it from 139 to 445.

Related codes

See all Kyocera ECOSYS M2040dn error codes