Shop parts
C0120Service codeCritical: machine stops

Kyocera ECOSYS M2040dn error C0120: MAC address data error

Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw

Quick answer

Kyocera ECOSYS M2040dn error C0120 means the MAC address data held by the printer is not correct. The first cause the manual lists is the flash memory not working properly, so start with a full power reset. If it returns, a technician checks the network status page and the main/engine PWB.

What does C0120 mean?

Every networked printer has a MAC address, a fixed hardware address used on the network. C0120 appears when the printer finds that this stored address data is wrong. The manual's fix is a power reset, and if the MAC address does not show on the network status page, a new main/engine PWB. The same code and the same checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, because Kyocera covers all of them in one service manual.

What causes C0120?

  • Flash memory not working properly

    A temporary fault that a full power reset may clear.

  • Incorrect MAC address

    The address stored on the main/engine PWB is wrong. The manual's fix is a new main/engine PWB.

What can you check yourself?

  1. 1

    Full power reset

    Turn the power switch off and pull out the power cord. Wait at least 5 seconds, plug it back in and switch on.

  2. 2

    Print the network status page

    If the printer starts, print the network status page from the report menu and see whether a MAC address is shown. Tell your technician what you find.

  3. 3

    If the code returns

    Leave the printer off, note the code shown on the panel and call a technician.

Safety: Only the power reset is a user task. Opening the printer to reach the boards is technician work; switch off and pull the plug before any cover is removed. When a new main/engine PWB is fitted, the manual says to move the EEPROM from the old board to the new one, run U004 if C0180 appears, and check the network settings because the MAC address changes.

Steps for a technician

  1. 1

    Reset the main power

    Switch off, unplug, wait 5 seconds, then reconnect the cord and switch on.

  2. 2

    Check the MAC address

    Print the network status page. If no MAC address is shown on it, fit a new main/engine PWB.

Need a part for this?

The store does not list the main/engine PWB for this code, so please ask on WhatsApp for availability.

Ask on WhatsApp: +91 88899-15080

When should you call a technician?

Call a technician if C0120 comes back after a power reset, or if the network status page shows no MAC address.

Questions people ask

What does error C0120 mean on a Kyocera M2040dn?
On a Kyocera ECOSYS M2040dn, C0120 is a MAC address data error. The network hardware address stored in the printer is not correct.
How do I clear Kyocera C0120?
Switch off, unplug for at least 5 seconds and switch on again. If it comes back, check whether the network status page shows a MAC address; if not, the manual says to replace the main/engine PWB.
Will my network settings change after fixing C0120?
If the main/engine PWB is replaced, yes. The manual warns that the MAC address changes with a new board, so settings such as a fixed IP address may need to be redone.

Related codes

See all Kyocera ECOSYS M2040dn error codes