Shop parts
C0160Service codeCritical: machine stops

Kyocera ECOSYS M2040dn error C0160: engine EEPROM data error

Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw

Quick answer

Kyocera ECOSYS M2040dn error C0160 is an engine EEPROM data error: the printer finds the EEPROM contents abnormal when it reads them. The first cause the manual lists is the EEPROM not working properly, so begin with a full power reset. If it returns, a technician runs U021 and may replace the EEPROM.

What does C0160 mean?

The EEPROM on the main/engine PWB holds engine data. C0160 appears when the data read from it is judged abnormal. The manual's order is a power reset, then maintenance mode U021 for faulty saved data, then a new EEPROM followed by U004. The same code and the same checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, because Kyocera covers all of them in one service manual.

What causes C0160?

  • EEPROM not working properly

    A temporary fault that a full power reset may clear.

  • Faulty data saved in the EEPROM

    The stored data is bad. The manual initializes it with U021.

  • Faulty EEPROM

    The EEPROM chip itself has failed.

What can you check yourself?

  1. 1

    Full power reset

    Turn the power switch off and pull out the power cord. Wait at least 5 seconds, plug it back in and switch on.

  2. 2

    If the code returns

    Leave the printer off, note the code shown on the panel and call a technician.

Safety: Only the power reset is a user task. Opening the printer to reach the boards is technician work; switch off and pull the plug before any cover is removed. Note that U021 resets user settings to factory defaults.

Steps for a technician

  1. 1

    Reset the main power

    Switch off, unplug, wait 5 seconds, then reconnect the cord and switch on.

  2. 2

    Run U021

    Run maintenance mode U021 (initialize memory) to clear the faulty saved data.

  3. 3

    Replace the EEPROM

    Fit a new EEPROM on the main/engine PWB, then run maintenance mode U004 (machine number).

Need a part for this?

The store does not list the EEPROM for this code, so please ask on WhatsApp for availability.

Ask on WhatsApp: +91 88899-15080

When should you call a technician?

Call a technician if C0160 comes back after a full power reset. U021 and the EEPROM change are service tasks.

Questions people ask

What does error C0160 mean on a Kyocera M2040dn?
On a Kyocera ECOSYS M2040dn, C0160 is an engine EEPROM data error. It means the printer judged the data it read from the EEPROM chip on the main/engine PWB to be abnormal.
How do I clear Kyocera C0160?
Switch off, unplug for at least 5 seconds and switch on. If C0160 returns, a technician runs U021, and if that fails, fits a new EEPROM and runs U004.
Does Kyocera C0160 need a new main board?
The Kyocera service manual's steps for C0160 stop at replacing the EEPROM chip. A main/engine PWB change is not listed for this code.

Related codes

See all Kyocera ECOSYS M2040dn error codes