Kyocera ECOSYS M2040dn errors C1810 and C1820: paper feeder communication error
Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw
Codes covered on this page: C1810, C1820
Quick answer
Kyocera ECOSYS M2040dn errors C1810 and C1820 are paper feeder communication errors. At power-on the printer sees a feeder is fitted but then cannot detect it. C1810 is the first feeder and C1820 the second. The first cause the manual lists is a drawer connector that is not fully joined, so the printer must sit squarely on the feeder.
What does C1810 mean?
The optional paper feeder (PF-1100) connects to the printer through drawer connectors where the units stack. C1810 or C1820 appears when the printer senses a feeder at power-on but then cannot find it. C1810 points at paper feeder 1, directly under the printer; C1820 points at paper feeder 2, under feeder 1, and its checks also include the lead through feeder 1. The same code and the same checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, because Kyocera covers all of them in one service manual.
What causes C1810?
Drawer connector not joined
For C1810, the printer is not seated properly on paper feeder 1. For C1820, the printer and feeder 1 are not seated properly on feeder 2.
Loose connector, damaged wire or faulty drawer connector
The leads from the PF main PWB (YC5) through the drawer connectors to the main/engine PWB (YC17) are not making good contact. For C1820 the path also passes through the PF main PWB of feeder 1 (YC6 and YC5).
Faulty PF main PWB
The control board in the paper feeder has failed.
Faulty main/engine PWB
The main control board is at fault. The manual lists this last.
What can you check yourself?
- 1
Switch off and unplug
Turn the printer off and remove the plug before you touch the feeder.
- 2
Look at how the units stack
Check that the printer sits flat and fully down on the paper feeder, with no gap or tilt. Get help to reseat it, as the printer is heavy.
- 3
Try once more
Plug in and switch on. If the code comes back, call a technician.
Steps for a technician
- 1
Reseat the paper feeder
Set the printer (and feeder 1, for C1820) back on the feeder below so the drawer connectors join firmly.
- 2
Check the connections
Check and clean the contacts, or repair and refit the connectors: PF main PWB (YC5) to drawer connector, and drawer connector to main/engine PWB (YC17). For C1820 also check PF main PWB (YC5) of feeder 2 to drawer connector and drawer connector to PF main PWB (YC6) of feeder 1. Replace the wire if there is no continuity or the drawer connector is faulty.
- 3
Replace the PF main PWB
If the code stays, fit a new PF main PWB in the feeder.
- 4
Replace the main/engine PWB
As the final step, fit a new main/engine PWB.
Need a part for this?
The store does not list the PF main PWB, drawer connector or main/engine PWB for this code, so please ask on WhatsApp for availability.
Ask on WhatsApp: +91 88899-15080When should you call a technician?
Call a technician if the code returns after the printer has been reseated on the feeder. The next checks involve wiring and boards.
Questions people ask
- What does error C1810 mean on a Kyocera M2040dn?
- On a Kyocera ECOSYS M2040dn, C1810 is a paper feeder communication error for paper feeder 1. The printer sensed the feeder at power-on but then could not detect it.
- What is the difference between Kyocera C1810 and C1820?
- C1810 refers to paper feeder 1, directly under the printer. C1820 refers to paper feeder 2, the second feeder below it.
- How do I fix Kyocera C1810?
- Switch off and check that the printer sits fully down on the feeder so the drawer connector joins. If the code stays, a technician checks the wiring, the PF main PWB and the main/engine PWB.
Related codes
- C2600: PF feed motor error (PF1)
- C2610: PF feed motor error (PF2)