Kyocera ECOSYS M2040dn error F040: controller and engine not talking
Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw
Quick answer
Kyocera ECOSYS M2040dn error F040 means the controller and the print engine cannot communicate. The manual first treats it as a temporary fault, then as old firmware. Start by switching off, unplugging, waiting at least 5 seconds and switching on again. If it returns, a technician updates the firmware.
What does F040 mean?
On this printer the controller and the print engine sit on one combined main/engine PWB, but they still exchange messages. F040 shows when that exchange fails. The manual's checks are a power reset, a firmware update for both the main and engine firmware, and then a new main/engine PWB. The same code and checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, since Kyocera covers all of them in one service manual.
What causes F040?
Temporary communication fault
The link between controller and engine failed and a full power reset may clear it.
Firmware not up to date
The main or engine firmware is older than the latest version.
Main/engine PWB fault
The combined main and engine board has failed.
What can you check yourself?
- 1
Full power reset
Switch off at the power switch and pull the plug. Wait at least 5 seconds, plug in and switch on.
- 2
If the code comes back
Write down the exact code shown, switch the printer off and call a technician. The other checks are inside the machine.
Steps for a technician
- 1
Reset the main power
Switch off, unplug, wait 5 seconds, then reconnect and switch on.
- 2
Update the firmware
Bring both the main firmware and the engine firmware up to the newest release.
- 3
Replace the main/engine PWB
If F040 still shows, fit a new main/engine PWB.
Need a part for this?
The store does not list the main/engine PWB named for this code, so please ask on WhatsApp for availability.
Ask on WhatsApp: +91 88899-15080When should you call a technician?
Call a technician if F040 comes back after a power reset. A firmware update or a new main/engine PWB is the next step.
Questions people ask
- What does F040 mean on a Kyocera M2040dn?
- It means the controller and the print engine in the Kyocera ECOSYS M2040dn are not communicating properly.
- Can a firmware update fix Kyocera F040?
- The Kyocera manual lists a firmware update as the second step, after a power reset. Both the main and the engine firmware should be brought to the latest version.
- Is F040 a hardware fault?
- It can be. If a power reset and the latest firmware do not clear it, the manual's last step is a new main/engine PWB.