Shop parts
J9002Paper jam codeWarning

Kyocera ECOSYS M2040dn J9002: document processor sensor on at start

Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw

Quick answer

Kyocera ECOSYS M2040dn code J9002 means one of the document processor's paper sensors was already on when it started to feed originals, so it assumes a jam. The usual cause is a scrap of paper left inside. First open the document processor cover, remove any paper or scraps, close it firmly and try again.

What does J9002 mean?

At the start of document feeding, every DP sensor in the path should be clear. J9002 appears when one of them is already on. On 35 ppm models the sensors are the DP feed sensor and DP timing sensor; 40 ppm models also have a DP backside timing sensor. The same code and steps apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, which share one Kyocera service manual.

What causes J9002?

  • Scraps in the document path

    A piece of paper or foreign object on a guide or actuator keeps a sensor on.

  • Wiring

    Loose DP feed sensor, DP timing sensor or (40 ppm models) DP backside timing sensor connectors at YC34 on the main/engine PWB.

  • Sensor fault

    A dirty, loose or failed DP sensor.

  • Main/engine PWB fault

    Checked last.

What can you check yourself?

  1. 1

    Clear the document processor

    Lift the document processor cover and remove the original and any scraps of paper you can see. Close the cover firmly.

  2. 2

    Try again

    Reload the originals and scan. If J9002 returns, call a technician.

Safety: Switch off and unplug the machine before anyone removes document processor covers or works on the main/engine PWB.

Steps for a technician

  1. 1

    Clear the document path

    Remove scraps of paper, foreign objects or burrs from the guides and actuators along the document path.

  2. 2

    Check wiring

    Reseat DP feed sensor, DP timing sensor and, on 40 ppm models, DP backside timing sensor connectors at main/engine PWB YC34, and replace a wire with no continuity.

  3. 3

    Check the DP sensors

    Clean, refit and reconnect the DP conveying sensors, and replace any that still fail.

  4. 4

    Replace the main/engine PWB

    As the last step.

Need a part for this?

The store does not list the DP sensors for this code, so please ask on WhatsApp if you need one.

Ask on WhatsApp: +91 88899-15080

When should you call a technician?

Call a technician if J9002 keeps showing with the document processor empty and closed.

Questions people ask

What does J9002 mean on a Kyocera M2040dn?
J9002 on a Kyocera ECOSYS M2040dn means a document processor sensor was already detecting paper when feeding started.
How do I fix Kyocera J9002?
Open the document processor cover, remove any paper or scraps, close it and try again. If it repeats, a technician cleans and checks the DP sensors and their wiring.
Which sensors cause J9002?
The DP feed sensor and DP timing sensor, plus the DP backside timing sensor on 40 ppm models such as the M2040dn.

Related codes

See all Kyocera ECOSYS M2040dn error codes