Kyocera ECOSYS M2040dn moire or wavy pattern on copies
Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw
Quick answer
A moire pattern on a Kyocera ECOSYS M2040dn is a wavy or checked pattern that appears when copying or scanning printed photos and screens. It is a scanner side effect. First change the original image quality mode in the System Menu. If the pattern runs along the scan direction, turn the original 90 degrees and scan again.
What is happening?
Moire appears when the fine dot pattern of a printed original clashes with the way the scanner samples it. Kyocera lists it only under scanner factors, for the contact glass and both sides through the document processor. Its fixes are settings and placement, with a scanner adjustment (U411) as the last step. The same checks apply to all eight models in this service manual.
What causes it?
Image quality mode
The original image quality setting does not suit the original. The pattern changes with the mode.
Original direction
The pattern appears along the scanning direction of the original.
Scanner adjustment
The U411 automatic scanner adjustment has not been run.
What can you check yourself?
- 1
Change image quality
Try a different original image quality mode in the System Menu and copy again.
- 2
Turn the original
Rotate the original by 90 degrees, place it again and copy.
Steps for a technician
- 1
Image quality
Set the original image quality in the system menu.
- 2
Original direction
Turn the original 90 degrees and set it again.
- 3
U411
Run U411 [Table(ChartA)] for the contact glass, or [DP FD(ChartA)] for DP back side scans.
Need a part for this?
No spare part is named for this fault in the manual, so the store has nothing to link here; please ask on WhatsApp if you need help.
Ask on WhatsApp: +91 88899-15080When should you call a technician?
Call a technician only if the pattern stays after changing the image quality and turning the original, so they can run U411.
Questions people ask
- How do I remove moire from Kyocera M2040dn copies?
- Change the original image quality mode in the System Menu. If the pattern remains, turn the original 90 degrees and copy again.
- Is a moire pattern a printer fault?
- No. Kyocera lists moire only under scanner factors, and the fixes are settings, placement and the U411 scanner adjustment.
- Why do copies of magazine photos look wavy?
- That wavy look is moire, from the printed dot pattern of the original. Changing the image quality mode usually changes the pattern.