107TH Main Motor Drive Gear For Canon IR 2002 2202 2004 2204 ( Best Quality )

Product Name: 107TH Main Motor Drive Gear For Canon IR 2002 2202 2004 2204

The 107th Main Motor Drive Gear is a critical component of the main motor assembly in Canon imageRUNNER 2002, 2202, 2004, and 2204 printers. It is responsible for transferring power from the main motor to the drum unit, which rotates the drum and transfers the toner powder to the paper.

A worn or damaged 107th Main Motor Drive Gear can cause a variety of printing problems, such as:

• Paper jams
• Printer malfunctions
• Poor print quality
• Toner streaks or smudges

If you are experiencing any of these problems, it is important to replace the 107th Main Motor Drive Gear as soon as possible.

This genuine Canon replacement 107TH Main Motor Drive Gear For Canon IR 2002 2202 2004 2204 is guaranteed to fit and perform perfectly in your printer. It is also backed by Canon’s warranty, so you can be sure that you are getting a high-quality product.

Features:

• Genuine Canon replacement part
• Guaranteed to fit and perform perfectly in your printer
• Backed by Canon’s warranty
• Fixes a variety of printing problems caused by a worn or damaged 107th Main Motor Drive Gear

Compatibility:

• Canon imageRUNNER 2002
• Canon imageRUNNER 2202
• Canon imageRUNNER 2004
• Canon imageRUNNER 2204

Installation:

The 107TH Main Motor Drive Gear For Canon IR 2002 2202 2004 2204 is a relatively easy part to install. To replace the 107th Main Motor Drive Gear in your Canon imageRUNNER printer, follow these steps:

1. Turn off the printer and disconnect the power cord.
2. Open the front cover of the printer.
3. Locate the main motor assembly and remove it from the printer.
4. Remove the old 107th Main Motor Drive Gear from the main motor assembly.
5. Install the new 107th Main Motor Drive Gear into the main motor assembly.
6. Reinstall the main motor assembly into the printer.
7. Close the front cover of the printer.
8. Connect the power cord and turn on the printer.

Once the printer has booted up, you should be able to print again without any problems.