Main Thermistor For Canon IR ADV 8085 8095 8105 IR ADV 8208 8285 8295  (Best Quality)

The main thermistor for Canon IR ADV 8085 8095 8105 IR ADV 8208 8285 8295 is a critical component of the fuser assembly. It is responsible for measuring the temperature of the fuser roller and sending this information to the printer’s control board. The control board then uses this information to adjust the temperature of the fuser roller to ensure that it is hot enough to fuse the toner to the paper without overheating.

Over time, the main thermistor can become worn or damaged, which can cause a variety of printing problems, such as:

• Toner smudges
• Wrinkled paper
• Poor print quality
• Paper jams

If you are experiencing any of these problems, it is important to replace the main thermistor as soon as possible.

This genuine Canon replacement main thermistor is guaranteed to fit and perform perfectly in your imageRUNNER ADVANCE printer. It is also backed by Canon’s warranty, so you can be sure that you are getting a high-quality product.

Features:

• Genuine Canon replacement part
• Guaranteed to fit and perform perfectly in your imageRUNNER ADVANCE printer
• Backed by Canon’s warranty
• Fixes a variety of printing problems caused by a worn or damaged main thermistor

Compatibility:

• Canon imageRUNNER ADVANCE 8085
• Canon imageRUNNER ADVANCE 8095
• Canon imageRUNNER ADVANCE 8105
• Canon imageRUNNER ADVANCE 8208
• Canon imageRUNNER ADVANCE 8285
• Canon imageRUNNER ADVANCE 8295

Installation:

The main thermistor for Canon IR ADV 8085 8095 8105 IR ADV 8208 8285 8295 is a relatively easy part to install. To replace the main thermistor in your Canon imageRUNNER ADVANCE printer, follow these steps:

1. Turn off the printer and disconnect the power cord.
2. Open the front cover of the printer.
3. Locate the main thermistor and remove it from the printer.
4. Remove the old main thermistor.
5. Install the new main thermistor into the printer.
6. Close the front cover of the printer.
7. Connect the power cord and turn on the printer.

Once the printer has booted up, you should be able to print again without any problems.

Additional Information:

The main thermistor is a relatively inexpensive part to replace, but it is important to do so as soon as possible if it becomes worn or damaged. By replacing the main thermistor, you can ensure that your imageRUNNER ADVANCE printer continues to produce high-quality prints for many years to come.

Tips for Maintaining Your Printer’s Main Thermistor:

• Clean the main thermistor regularly with a soft cloth or a can of compressed air.
• Avoid touching the main thermistor with your hands.
• Be careful not to spill toner on the main thermistor.
• If you do spill toner on the main thermistor, clean it up immediately.

If you are experiencing any problems with your printer’s main thermistor, please consult your printer’s manual or contact a qualified technician.

Safety Guidelines:

• Always turn off the printer and disconnect the power cord before replacing the main thermistor.
• Be careful not to touch the fuser roller, as it can be very hot.
• If you do touch the fuser roller, let it cool down completely before handling it.
• If you are unsure about how to replace the main thermistor, please consult your printer’s manual or contact a qualified technician.