Shop parts
C6400Service codeCritical: machine stops

Kyocera ECOSYS M2040dn error C6400: zero-cross signal error

Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw

Quick answer

Kyocera ECOSYS M2040dn error C6400 means the zero-cross signal stopped arriving for 1 second while the fuser heater was on. The manual's first suspect is the cable between the low voltage PWB and the main/engine PWB. Switch off, unplug, wait at least 5 seconds and call a technician.

What does C6400 mean?

The main/engine PWB expects a steady zero-cross signal while it runs the fuser heater. C6400 appears if that signal is missing for 1 second in a row with the heater on. The manual's checks cover only the low voltage PWB, its lead to the main/engine PWB, and the main/engine PWB. The same code and the same checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, because Kyocera covers all of them in one service manual.

What causes C6400?

  • Loose connector or damaged wire

    The lead from the low voltage PWB (YC103) to the main/engine PWB (YC20) is not making good contact.

  • Low voltage PWB fault

    The low voltage power supply board is faulty.

  • Main/engine PWB fault

    The main control board is faulty. The manual lists this last.

What can you check yourself?

  1. 1

    Switch off and unplug

    Turn the power switch off, pull the plug out of the wall socket and note the code for your technician.

  2. 2

    Call a technician

    All checks for C6400 are on the power board and main board inside the printer.

Safety: Before anyone works on the low voltage power supply board, the manual says to switch the machine off, pull the plug and wait at least 5 seconds so the capacitors on the boards can discharge.

Steps for a technician

  1. 1

    Check the connection

    Clean the contacts and refit the connector between the low voltage PWB (YC103) and the main/engine PWB (YC20). Fit a new wire if there is no continuity.

  2. 2

    Replace the low voltage PWB

    If the code stays, fit a new low voltage PWB.

  3. 3

    Replace the main/engine PWB

    As the final step, fit a new main/engine PWB.

Need a part for this?

The store does not list the low voltage PWB or main/engine PWB named for this code, so please ask on WhatsApp for availability.

Ask on WhatsApp: +91 88899-15080

When should you call a technician?

Call a technician as soon as C6400 appears. Every check is on the power supply board, its wiring or the main board.

Questions people ask

What does error C6400 mean on a Kyocera M2040dn?
On a Kyocera ECOSYS M2040dn, C6400 is a zero-cross signal error. The signal was missing for 1 second while the fuser heater was switched on.
How do I fix Kyocera C6400?
A technician reseats the cable between the low voltage PWB (YC103) and the main/engine PWB (YC20). If that does not help, the low voltage PWB is replaced, and the main/engine PWB last.
Is Kyocera C6400 a fuser unit fault?
The Kyocera service manual does not replace the fuser unit for C6400. Its checks are the low voltage PWB, its cable and the main/engine PWB.
Can I reset Kyocera C6400 myself?
You can switch off and unplug the printer safely, but the fault is on the power boards, so a technician has to do the checks.

Related codes

See all Kyocera ECOSYS M2040dn error codes