Shop parts
F21XSystem codeCritical: machine stops

Kyocera ECOSYS M2040dn error F21X to F24X: image processing fault

Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw

Codes covered on this page: F21X, F22X, F23X, F24X

Quick answer

Kyocera ECOSYS M2040dn errors F21X to F24X mean the controller found a fault in image processing or system management. The manual's first check is the contact of the DDR memory on the main/engine PWB. Start with a full power reset, keeping the plug out for a minute or more.

What does F21X mean?

F21X, F22X and F23X come from the image processing part and F24X from system management, and the manual gives them all the same steps. The memory slot involved is YS500 on the main/engine PWB. The manual notes that F248 is a fault in the printer process: it clears with a power off and on, and if it keeps coming back with one particular print job, Kyocera wants the print data and a USB log. The same code and checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, since Kyocera covers all of them in one service manual.

What causes F21X?

  • DDR memory contact

    The DIMM in slot YS500 is not making good contact.

  • Main backup data

    Stored data may need to be reset with U021.

  • Main/engine PWB fault

    The main board has failed.

  • Particular print data (F248)

    F248 can repeat when the same print job is sent again.

What can you check yourself?

  1. 1

    Full power reset

    Switch off at the power switch and pull the plug from the wall. Some power stays in the machine with the switch off, so wait a minute or more, then plug in and switch on.

  2. 2

    Note the print job

    If the code appears when one particular document is printed, note which file it was. A technician may need it.

  3. 3

    If the code comes back

    Write down the exact code shown, switch the printer off and call a technician. The other checks are inside the machine.

Safety: Before anyone opens the machine to work on boards or cables, switch it off and pull the plug. Part of the machine stays powered while the switch is off, so the plug must come out.

Steps for a technician

  1. 1

    Check the DDR memory

    Take out and refit the DIMM in slot YS500 on the main/engine PWB, then test. Replace the DIMM if the error repeats.

  2. 2

    Run U021 (backup initialization)

    Run maintenance mode U021 to reset the controller backup data, then test the machine again.

  3. 3

    Replace the main/engine PWB

    If the error still shows, fit a new main/engine PWB and test again.

  4. 4

    Collect a USB log

    Save a USB log and send it to Kyocera service support. For F248 that repeats with one job, also capture that print data.

Need a part for this?

The store does not list the main/engine PWB or DIMM named for this code, so please ask on WhatsApp for availability.

Ask on WhatsApp: +91 88899-15080

When should you call a technician?

Call a technician if the F21X family error does not clear after a power reset with the plug out for a minute or more, or if it keeps coming back.

Questions people ask

What does F248 mean on a Kyocera M2040dn?
F248 is in the F24X group. The Kyocera manual calls it a fault in the printer process that clears with a power off and on.
F248 keeps coming back with one PDF, why?
The manual says F248 can repeat with specific print data. Kyocera asks for that print data and a USB log to study it.
How does a technician fix F21X to F24X?
They reseat the DDR memory, run U021, and replace the main/engine PWB if the error continues.

Related codes

See all Kyocera ECOSYS M2040dn error codes