Shop parts
F18XSystem codeCritical: machine stops

Kyocera ECOSYS M2040dn error F18X / F35X: video or print control fault

Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw

Codes covered on this page: F18X, F35X

Quick answer

Kyocera ECOSYS M2040dn errors F18X and F35X mean the machine found a fault in the video control or print control part of its main/engine PWB. For F18X the manual first checks the engine cables on that board. Start with a full power reset, with the plug out for a minute or more.

What does F18X mean?

F18X is reported by the video control section and F35X by the print control management part. On this family the main and engine boards are one combined PWB, and the related connectors on it are YC1 to YC3, YC5 to YC7, YC9, YC10, YC14, YC21 and YC23. F18X adds a cable check first; then both codes follow U021 and a board change. The same code and checks apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, since Kyocera covers all of them in one service manual.

What causes F18X?

  • Engine cable connection (F18X)

    A loose harness or connector between the engine parts and the main/engine PWB.

  • Backup data

    Stored data may need to be reset with U021.

  • Main/engine PWB fault

    The combined main and engine board has failed.

What can you check yourself?

  1. 1

    Full power reset

    Switch off at the power switch and pull the plug from the wall. Some power stays in the machine with the switch off, so wait a minute or more, then plug in and switch on.

  2. 2

    If the code comes back

    Write down the exact code shown, switch the printer off and call a technician. The other checks are inside the machine.

Safety: Before anyone opens the machine to work on boards or cables, switch it off and pull the plug. Part of the machine stays powered while the switch is off, so the plug must come out.

Steps for a technician

  1. 1

    Check the DDR memory (DIMM)

    Kyocera's first check for any F code: take the DIMM out of slot YS500 on the main/engine PWB, refit it and test. If the error repeats, replace the DIMM.

  2. 2

    Check the engine connectors (F18X)

    Check the harness and connectors on the main/engine PWB (YC1 to YC3, YC5 to YC7, YC9, YC10, YC14, YC21 and YC23), then test.

  3. 3

    Run U021 (backup initialization)

    Run maintenance mode U021 to reset the controller backup data, then test the machine again.

  4. 4

    Replace the main/engine PWB

    If the error still shows, fit a new main/engine PWB and test again.

  5. 5

    Collect a USB log

    If nothing above clears it, save a USB log (USBLOG) from the machine and send it to Kyocera service support for study.

Need a part for this?

The store does not list the main/engine PWB or DIMM named for this code, so please ask on WhatsApp for availability.

Ask on WhatsApp: +91 88899-15080

When should you call a technician?

Call a technician if the F18X family error does not clear after a power reset with the plug out for a minute or more, or if it keeps coming back.

Questions people ask

What does F18X mean on a Kyocera M2040dn?
F18X covers F180 to F18F and means the Kyocera ECOSYS M2040dn found a fault in its video control section.
What is Kyocera F35X?
F35X is a fault in the print control management part. The manual's fix is U021 and then a new main/engine PWB.
Will a restart clear F18X?
Try a full power reset with the plug out for a minute or more. If the code returns, a technician needs to check the cables and the main/engine PWB.

Related codes

See all Kyocera ECOSYS M2040dn error codes