Kyocera ECOSYS M2040dn J0110: right cover open detected during printing
Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw
Quick answer
Kyocera ECOSYS M2040dn code J0110 means the printer detected its right cover opening in the middle of a print job, so it stopped. The likely cause is a cover that is not fully latched. Open the cover, clear any paper, then close it firmly and try again. If it persists, the interlock switch needs checking.
What does J0110 mean?
The printer uses an interlock switch to know that the cover is shut. If that switch reports the cover as open during printing, the job stops with J0110. The fix is either a cover that is not engaging properly or an interlock switch that is not working. The same code and steps apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, which share one Kyocera service manual.
What causes J0110?
Cover not engaged
The cover is not fully closed, is fitted badly or is bent.
Interlock switch fault
The interlock switch is loose, its connector is not seated, or the switch has failed.
What can you check yourself?
- 1
Close the cover firmly
Open the cover, remove any paper the panel shows, then close the cover until it clicks.
- 2
Look for damage
Check whether the cover looks bent or a hinge is broken. If so, do not force it; ask a technician.
- 3
Try again
Close all covers, switch on and print a few pages. If the same code keeps coming back, stop and call a technician.
Steps for a technician
- 1
Check the cover
Make sure it closes securely and refit it if needed. Repair or replace it if deformed.
- 2
Check the interlock switch
Refit the switch and reconnect its connector. Replace it if the fault remains.
Need a part for this?
The store does not list the cover or interlock switch for this code, so please ask on WhatsApp if you need one.
Ask on WhatsApp: +91 88899-15080When should you call a technician?
Call a technician if J0110 returns with the cover properly closed, or if the cover is bent or broken.
Questions people ask
- What is J0110 on a Kyocera M2040dn?
- J0110 on a Kyocera ECOSYS M2040dn means the right cover was detected as open while printing, so the printer stopped the job.
- My cover is closed but J0110 still shows. Why?
- The Kyocera manual names two causes: a cover that does not engage properly or is deformed, and an interlock switch that is loose or faulty.
- Can I fix Kyocera J0110 myself?
- You can close the cover firmly and clear paper. Refitting or replacing the interlock switch is a technician job.