Kyocera ECOSYS M2040dn J9061: DP feed motor rotation error
Applies to: Kyocera ECOSYS M2040dn, Kyocera ECOSYS M2135dn, Kyocera ECOSYS M2635dn, Kyocera ECOSYS M2635dw, Kyocera ECOSYS M2735dw, Kyocera ECOSYS M2540dn, Kyocera ECOSYS M2540dw, Kyocera ECOSYS M2640idw
Quick answer
Kyocera ECOSYS M2040dn code J9061 is a DP feed motor rotation error: the document processor's feed motor kept turning, or the firmware did not run properly. The manual's fix starts with clearing paper and a power reset. Remove any paper from the document processor, switch off, unplug, wait 5 seconds and switch on.
What does J9061 mean?
J9061 appears when the DP feed motor keeps rotating when it should stop, or when the firmware does not operate properly. The manual lists only two steps: a power reset after clearing paper and checking the sensors, and then a firmware upgrade. The same code and steps apply to the ECOSYS M2135dn, M2635dn, M2635dw, M2735dw, M2540dn, M2540dw and M2640idw, which share one Kyocera service manual.
What causes J9061?
Controller did not start properly
A full power reset clears this.
Firmware problem
The firmware is not activating properly.
What can you check yourself?
- 1
Clear the document processor
Lift the document processor cover and remove the original and any scraps of paper you can see. Close the cover firmly.
- 2
Do a full power reset
Switch off, unplug, wait at least 5 seconds, plug in and switch on.
- 3
Note the code
If J9061 returns, write it down for your technician.
Steps for a technician
- 1
Reset the main power
Clear paper out of the conveying section and look at the sensors. After that, switch off, unplug, wait 5 seconds and switch on.
- 2
Upgrade the firmware
Install the latest firmware version.
Need a part for this?
No spare part from the store is involved in the manual's fix for this code; please ask on WhatsApp if you need help with a firmware upgrade.
Ask on WhatsApp: +91 88899-15080When should you call a technician?
Call a technician or your dealer if J9061 returns after a full power reset, since the firmware then needs upgrading.
Questions people ask
- What does J9061 mean on a Kyocera M2040dn?
- J9061 on a Kyocera ECOSYS M2040dn is a DP feed motor rotation error: the document processor feed motor kept running, or the firmware did not operate properly.
- How do I fix Kyocera J9061?
- Remove any paper from the document processor and do a full power reset. If it returns, the Kyocera manual's next step is a firmware upgrade.
- Does J9061 mean the DP feed motor is broken?
- The Kyocera manual does not list motor replacement for J9061. Its steps are a power reset and a firmware upgrade.